Hair dryer is a device to dry the hair after bathing or shampooing. This tool is generally used in private by women, besides being used in beauty salons, printing company, printing photos, and others.
Over time this tool will decrease the quality suffered damage to its components, in addition to the damage can occur due to old age or use too often. Before discussing how to fix Hair dryer would be helpful to know the parts of the tool along with how it works.
Hair dryer parts
Cables connecting devices to an electrical outlet
Agency tool
Fan speed control motors
filament / heater coil
How it works Hair dryer
At the time of the connecting cable is connected to a power outlet, the power will go into the speed control switch.
When we press the power button, the speed control will flow from the connecting cable to the switch and then forwarded to the motor of the fan and the filament (heater coil) then immediately turn around with a motor to move / rotate the fan, along with it, the filament will become hot due electrified .
With the rotation of the fan and overheating in the filament will exhaled air from outside or driven by a fan to pass through the hallway whose walls are surrounded by hot filament, so the air is exhaled by the fan will be pushed out in hot conditions because heated by the filament.
When the speed control button is located on the low position of the rotation motor of the fan is on slow rotation position so that exhaled air less.
When the switch pengatuir motor speed is at a hight position then the fan rotation will be faster so that hot air is blown there will be more. so it goes the fan and the filament will work together when a key regulator of motor speed on the on position.
Symptoms of damage that often occurs in Hair dryer:
total dead
The fan does not spin but the tool body is hot
Hair dryer fan spins but no heat
The fan spins but does not heat the air out of money
Round Hair dryer abnormal tau seeprti halting slow.
total dead
This occurs due to the possibility of electrical connecting cable is disconnected or the cable that goes to the speed control switch regardless. Check the cable connecting the physical basis there may be a drop out from being bitten by rats. Or check using AVO meter RX1Kohm, if you do not have the AVO meter in the house then you can use tespen instead, by way of opening the body Hair dryer until it looks all parts then insert the connecting cable into an outlet. Stick it to each connector end tespen in dalamnuya, mark the part that can not turn on tespen, bial have found that damage to immediately repair the appropriate components.
The fan does not spin but the tool body is hot
This can occur due to damage to the motor of the fan, it may be a carbon brush that has been discharged or windings on the motor burned out. Carbon brush is a connector that connects the cable to the motor in order to rotate. Carbon brush can be depleted as a result of friction with the motor that is always moving.
Hair dryer fan spins but no heat
this is due to the filament / heater coil broke, when the coil broke immediately replace it with a new one.
Round Hair dryer is not normal, such as stuttering or slow
There are two possibilities when it happens, namely:
carbon brush is already thin
mati.Untuk carbon brush motor capacitors are already thin and dead capacitors can replace them with the appropriate.
Thus a brief review I on how to fix Hair dryer, may be useful for you.
I am big fan of my shiny and silky hairs, and so I use natural shampoo and a hair dryer on my hairs. This is the best tool I think that every woman should have in her hair styling tools.
ReplyDelete